For all enquiries please contact : info.nealpurchasedesigns@gmail.com

2+1=fun


Here's my general 2+1 set up. The side fins are bigger, and back fin an inch or two smaller than the Widow Maker. I originally tried two of Andrew Kidmans' Parmenter Widows bout 10 years ago, which was documented in his early 2000's movie Glass Love, one 6'4 and the other 6'6 ( filmed in perfect 4-6ft supa bank). They felt great in waves above 3ft but the back fin seemed to drag in smaller and lower quality conditions.

So after much trial and error, surfing and sanding, I came to a great balance with these fins, scaling thrusters up and single fins down, moving forward and back. Placed at 6 1/4 and 12 1/2 , I surf this 2+1 most days on the East Coast of Oz ( apart from the Quartets now) and they love ALL conditions from 1-2 ft beachies to cyclone season. Also a couple of seasons in Hawaii, with memorable sessions at Haleiwa and maxing Sunset.

They get away much faster than Thrusters, due to their forward placement but are drivier cause of the larger back fin, plus looser and smoother from the cluster. I do not condemn the Thruster set up in any way, or "truster" it has stabilized surfing and givin a great bench-mark to move on. I may go back there one day.

4 comments:

  1. I think you are spot-on, Neal. I've been riding a few 2+1s over the last year or two and just can't find any drawbacks as of yet - like you say, they go in anything.

    Love the look of the boards you did recently for Rasta and Parko. What bottoms shape do you tend to go for?

    Cheers, Tommy

    ReplyDelete
  2. Yeah, hi Tommy, Depending on their rockers and width , it all changes. But for my fav I mostly go a supa slight vee or roll in the first 5-6 inches( like 1/8") to flat, then slight concave ( round front foot) with a double running thru it into tail , spiral vee-ing round the fins , softening out thru tail. Sounds complicated , but flows and is very simple and easy to shape.

    Thanks Neal

    ReplyDelete
  3. Hi Neal, I figured you would be the perfect person to ask about 2+1 fin placement, so I figured I would give a shot at asking you personally. I am shaping a 5'6" mini sim style board but am giving it a round tail. I would like to stick a 2+1 setup in it if it would conceivably work in a 17-18" wide tail, but am wondering about the fin placement--would your measurements at 12.5" and 6.25" work well in a board so wide and short? I would love to get your input on this--thanks so much for your time!

    Thad Nicholls

    ReplyDelete
  4. A formidable share, I simply given this onto a colleague who was doing a bit of analysis on this. And he actually purchased me breakfast because I found it for him.. smile. So let me reword that: Thnx for the treat! However yeah Thnkx for spending the time to discuss this, I feel strongly about it and love reading more on this topic. If potential, as you turn out to be experience, would you thoughts updating your weblog with extra particulars? It's highly helpful for me. Large thumb up for this weblog post! casino real money

    ReplyDelete